TAGUTI

How to choose a good Wire EDM filter

After a period of working, the Wire EDM filters normally will be blocked. At this time, a serious problem that is placed before the machine owners: how to choose a good replacement filter for their valuable machines. In this article, TAGUTI will give you a detailed answer.

Most of wire EDM filter users or merchants are mainly considering filter’s unit price. But a filter is good or not, not only depends on the unit price, but also the following aspects.

                     Wire EDM Filter YT-19NW

1. Material
Wire EDM filters are used to filter the water. So the precision of filtration paper is the key point to the quality. TAGUTI filter adopt Japanese filtration paper that can supply his users a good precision, and due to the 5 Micron precision, filters’ service life will also be longer compared to similar products. On the other hand, glue is another keyword of a good wire EDM filter. When filters are working, the outside or the inside pressure is very high, if the glue is not good, “broken filter” comes out. TAGUTI filter’s glue all imported from Japan, this will ensure that while in high pressure conditions, the “broken filter” won’t appear.

2. Service Life
A good wire EDM filter can be used more than 400 hours. This is fully dependent on the filter’s material. TAGUTI’s strict material selection system will give his partners a good choice.

3. Unit Price
Price is an eternal topic in business. A good filter could have a competitive price, but a low price filter may not have a good quality. TAGUTI filter will supply his partners a reasonable and competitive price which is also dependent on a high quality.

4. Machine Type
Compared to filters which are used on suspended type machines, the service life of filters those are used on immersion type machines is short.

5. Design Requirement
The weight of used filters should exceeds the standard storage weight and filter itself weight sum.

 Points for attention in use

Filters’ service life will be short when it’s used for nonferrous metals like aluminum etc,. The reason is that the metal is to be hydroxide and the filter will be blocked faster than normal. In addition, the filter service life tends to be short when it’s used on tungsten carbides, titanium alloys and special metals.

Friends interested in learning more about Wire EDM filters, can visit http://www.filter-supplier.com . David will be there to talk more with you.