News

Glass Fiber Pocket Filter | TAGUTI Air Filter supplier Features Glass Fiber Pocket Filter | TAGUTI Air Filter supplier l Frame: Galvanized frame, aluminum frame, stainless steel frame. Different thickness could be chosen: 21mm, 25mm, 46mm. l Media: Micro glass fiber l Efficiency: (EN779:2002) F5, F6, F7, F8, F9 (ASHRAE 52.2:2007) MERV10, MERV12, MERV13, MERV14, MERV15 l Recommended Final Pressure Drop: 550Pa l Temper

Non-woven Pocket Filter | TAGUTI Air filter,  wire edm filter exporter Features l Frame: Galvanized frame, aluminum frame, stainless steel frame. Different thickness could be chosen: 21mm, 25mm, 46mm. l Media:   l Efficiency: (EN779:2002) G4,F5 (ASHRAE 52.2:2007) MERV8, MERV10 l Recommended Final Pressure Drop: 450Pa l Temperature Resistance Resistance: 70℃ l Flame-retardant Level: DIN 53438 F1 Applications l Ai

Temperature Resistance-resistance Panel Filter | TAGUTI Air filters supplier Features Frame: Galvanized frame, aluminum frame or stainless steel frame Media: Heat-resistant glass fiber Efficiency: (EN779:2002) G4, F5 (ASHRAE 52.2:2007) MERV7, MERV8 Recommended Final Pressure Drop: 250Pa Temperature Resistance Resistance: 300℃ Flame-retardant Level: DIN 53438 F1 Applications For high Temperature Resistance air purific

Washable Metal Filter } TAGUTI Air filter Features l Frame: Aluminum alloy frame. l Media: l Efficiency: (EN779:2002) G3, G4, F5 (ASHRAE 52.2:2007) MERV7, MERV8, MERV9 l Recommended Final Pressure Drop: 250Pa l Temperature Resistance Resistance: 250℃ l Flame-retardant Level: DIN 53438 F1 Applications l Air filter for general building air conditioning systems l Primary air filtration for industrial-grade ventilation s

Paper Frame Pleated Filter } TAGUTI Air Filters Features Frame: Rigid water resistant cardboard Media: Flame retardant synthetic fiber Efficiency: (EN 779:2002) G4 (ASHRAE 52.2:2007) MERV8 Recommended Final Pressure Drop: 250Pa Temperature Resistance Resistance: 70℃ maximum in continuous service Applications Pre-filtration for commercial & industrial AHU

Inlet Air Filter System |Air filter manufacturer Inlet air filter system proposed for IOCL, PREP & PxPTA project, Panipat. Air is drawn into the Self cleaning air system through inlet hoods that protect the filters from the effects of rain, snow and sun. These inlet hoods contain deflectors that direct the incoming air downward and misteliminators that remove mist/fog in the incoming air. The air is then cleaned 

Building the Air Filter Alarm PreventHigh Energy Consumption | TAGUTI air filter exporter The air filter alarm was built on a breadboard using simple components such as resistors, variable resistors, one integrated circuit (IC), LEDs, and of course the light dependent resistor. A PSpice simulation of the basic circuitry for the alarm can be found at the end of this paragraph. A dirty air filter, one which had been us

Air Filter Alarm System to Prevent High Energy Consumption- Researching Sensors The second major task for this research project was to find a sensor that could be used to detect when the air filter needed to be changed. This proved to be a lengthy process since there were so many types of alarms to consider. First, infrared emitters and detectors were researched to see if they could be used. This idea was discarded o

Inlet Air Filter System | TAGUTI Air Filters suppliers Inlet air filter system proposed for IOCL, PREP & PxPTA project, Panipat Air is drawn into the Self cleaning air system through inlet hoods that protect the filters from the effects of rain, snow and sun. These inlet hoods contain deflectors that direct the incoming air downward and misteliminators that remove mist/fog in the incoming air. The air is then cle